Mounting 'picTeur' on the camera

Steps for attaching the slip/screw type camera mount assembly:

  • be sure the camera adapter/mounting ring is circumferentially large enough to allow the camera barrel to extend and retract without obstruction,
  • be sure there is enough flat surface on the camera barrel base ring to which the camera adapter/mounting ring can be attached,
  • with the camera adapter/mounting ring in place, temporarily turn on the camera and extend and retract the camera barrel,
  • when camera adapter/mounting ring appears to be in the right place, attach it to the camera barrel base ring using an industry grade adhesive,
  • be careful not to drop adhesive on the camera lens assembly,
  • while adhesive is still unset, be sure the camera adapter/mounting ring is positioned concentrically with the camera barrel,
  • wait a few minutes,
  • the camera is ready for use,

Steps for mounting the main housing assembly:

  • SLIP TYPE CAMERA MOUNT: Slip one end of the barrel track into the camera mounting ring,
  • tighten the mounting screw onto the barrel track,
  • the main housing assembly is mounted on the open of the barrel track,
  • SCREW TYPE CAMERA MOUNT: Screw the adapter ring on the end of the configured barrel track into the camera mounting ring,
  • the main housing assembly is mounted on the open of the barrel track,

Use 'picTeur' to
photograph
subjects that are
dangerous to get
close to.
Digital Camera Lens Guard and Use Extender - Patent No. 9,300,847